What is the manufacturer of metal glass sintered glass glaze sintering. Also known as the glass glaze sintering decal, usually in the oven in. Sintered glass glaze, the key is to control the sintering temperature. Colored ink is oily solvent and alkyd resin blend, firing in the furnace about to go through the following stage:
The first stage: from room temperature to 120 degrees, pre heating, printing ink no change;
The second stage: from 120 degrees to 250 degrees Celsius, evaporation and gasification of light oil;
The third stage: from 250 degrees ~500 degrees Celsius, heavy oil and resin combustion and gasification;
The fourth stage: from 500 DEG ~580 DEG C, glazed glass powder in molten glass substrate and the surface is slightly softening;
The fifth stage: from 580 DEG ~620 DEG C, glass glaze finish melting, will also melt into the pigment powder, then the surface is completely softened vitreous body, glaze and glass combined to complete the transfer and sintering glaze, and then slowly to room temperature.
