Metal glass sintering process
Metal glass sintering process:
It comprises the following steps: A. cleaning of the metal workpiece, which comprises the steps of metal workpieces with metal cleaning agent soaked in water for 5 minutes, then wash it with clean water, then diluted detergent further cleaning of the metal workpiece, then rinse, after cleaning the metal workpiece with gauze dipped in alcohol dehydration, and then loaded into the porcelain box multi oven, oven at a certain temperature for 30 minutes; B. for cleaning the glass sheet, the metal cleaning agent comprises the steps of soaking in the water the glass for 2 minutes, and then use clean water to wash, then the appropriate dilution step of cleaning the clean one piece of glass, and then use the wash again, with gauze dipped in alcohol on the glass after cleaning after dehydration, dehydration after a piece of glass into the porcelain bowl, with a blow Fan after blowing into the drying box; C. flux and glass, the procedure includes the processing of the workpiece through the metal hole will apply a small amount of flux, this piece of glass into the inner hole of the workpiece by fixed position; D. tooling, tooling mainly comprises a stainless steel box, a graphite pad. At least one sheet of graphite, the workpiece itself, a graphite cover, graphite gasket and a stainless steel cover; E. sintering, the sintering and tempering furnace in tunnel engineering; F. uninstall, 2 hours of work on the tunnel furnace, remove the workpiece from the fixture.
